|
CONTROL
- SMOKE
- FLY ASH
- DUST
- PREVENT FIRES
MEC's patented technologies can economically
and efficiently scrub smoke, fly ash and dust from BEE/HIVE
TEE PEE AND OLIVINE BURNERS, SMOKE STACKS AND PIT BURNING
OPERATIONS.
|
|
TECHNOLOGY
The "MISTER"
systems consist of an arrangement of atomizing nozzles, whose
function is controlled by a central control module. The control
module maintains the required operating pressure, quadruple
filters the water supply, and activates the operation of the
nozzles based on signals received from sensors, which are
specified according to the application.
Flow through
the "MISTER"
nozzles can be governed by a thermostat/humidistat, timer
or computer. These fully adjustable controls activate the
atomizing nozzles automatically, and ensure environmental
control and convenience.
|
(above
picture is from a 80' X 15' wide by 17' deep pit burn)
Complete
scrubber systems available with air extractor and venturi
scrubber
|
| SMOKE
AND FLY ASH CONTROL
The "MISTER"
technology acts as an external or internal scrubber allowing
for clean burning of debris and tree stumps. Fly ash is also
eliminated thereby, reducing potential fire hazards.
"CAP
& STACK" SYSTEMS
A cap and stack
system can be added to Bee-Hive/Tee-Pee and Olivine burners
to allow for regular monitoring of emissions.
DUST CONTROL
Dust particles
and other contaminants are saturated by the micron sized droplets
of fog, thereby making them heavier than air, which causes
them to fall back into the fire to be re-burned. Cycle duration
is fully adjustable for optimal control and efficiency.
|
ODOUR
CONTROL
Metering of
odour neutralizing concentrates into the system is accomplished
with a water treatment injection system
.
All
MEC systems
are C.S.A Approved
|
COOLING
Efficient cooling
can be achieved by maximum evaporation in any environment
or temperature.
ATOMIZING
NOZZLES
"MISTER"
atomizing nozzles have unique performance specifications,
and offer very low volume flow rates. "MISTER"
nozzles also have very high rates of forward discharge velocity,
which cause high turbulence and result in extremely uniform
particle distribution (approx. 2 to 10 microns)
.
|
Over 100 dealers world wide to serve
you!
Call, Fax or Email for the one nearest you.
Tel: (604)792-7779 Fax: (604) 792-7072
|
