|
Through the use of very small particulates
of water (sub-micron to 20 micron), MEC's technologies can make
a significant difference in the amount of fugitive dust in a grain
handling facility, without any measurable percentage of moisture
or weight gain.
"MISTER" systems CAN:
 |
Reduce
the risk of elevator explosions |
|
Reduce
the fugitive dust emissions at receiving & load
out areas |
|
Increase
profits from less product shrinkage at all transfer
points |
|
Create
a safer & healthier work environment |
|
 |
|
Bucket
elevators |
|
Receiving
pit |
|
Tripper
where grain enters bins |
|
Ventilation
shafts |
|
|
Open
areas during down/housekeeping |
|
Load-out
areas |
|
Dock
loading facilities |
|
All
conveyor applications |
|
|
"MISTER"
Technology |
"MISTER"
Atomizing Nozzles |
The "MISTER" system treats, filters and pumps ordinary
water to between 600 and 1000 psi. It is delivered through
a 1/2" stainless steel tube or flexhose. At various
distances in the tubing there are unique "MISTER" nozzles that atomize the water into micron sized particulates
ranging from 1 micron to 30 microns.
The "MISTER" systems
consist of an arrangement of atomizing nozzles, that are
controlled by a central control module. The control module
maintains the required system operating pressure, filters
the water supply, and activates the operation of the nozzles
based on signals received from a sensor, which is specified
according to the application. |
"MISTER" atomizing
nozzles have unique performance specifications, and offer
very low volume flow rates. "MISTER" nozzles also have very high rates of
forward discharge velocity, which cause there high turbulence
and results in extremely uniform particle distribution.
Nozzles
.006"-.040" |
Operating
Pressure
600-1000PSI |
Flow
.0128-.0195 gal/min. |
|
"Dust Spray
Bar" |
"Dust control
at Ship loader" |
|
Each
"MISTER" nozzle includes non- corrosive stainless
steel orifice and internal components. A special O-ring
seal design requires only finger tightening for a completely
watertight, leak proof seal.
To provide a receptacle for each nozzle, lengths of pipe
are precision machined at various spacings depending on
application requirements.
|
Other
Applications for
Cooling, Humidifying & Odor Control:
|
|
Food
Processing Plants |
|
|
Feed
Mills |
|
|
Rendering
Plants |
|
|
Agricultural
Industries |
|
|
Lagoons |
|
|
Refuse
Areas |
|
|
Feed
Lots |
|
All
MEC systems
are C.S.A Approved
|
|
Over 100 dealers world wide to serve you!
Call, Fax or Email for the one nearest you.
Tel: (604)792-7779 Fax: (604) 792-7072
|
|
