Greenhouse Applications

The "MISTER" system creates an ideal environment for:


	Plug Production
	Seed Germination
	Propagation
	Pest Management
	Frost Protection
Resulting in:
	Higher quality plants
	Superior root systems
	Increase yields
	Reduced hot & cold spots
	Decreased labour costs
	Improved working conditions

COOLING

Evaporation cooling in achieved in any environment or climate without the traditional problems of wetting and residual moisture. This is particularly effective in climates of low relative humidity.

HUMIDITY

achieve and maintain precise humidity levels without wetting. Manual, automatic, or computer compatible options available.

REDUCE ENERGY COSTS

Maintains ideal temperatures allowing growers to maximize production regardless of high summer temperatures and eliminates the energy costs of ventilation equipment.

STAINLESS STEEL TUBE & SPIGOTS

NOZZLES

CONTROL MODULE

FLEXHOSE

ADJUSTABLE NOZZLE ORIENTATION

"MISTER""
Control Module

"MISTER" control modules are available in many flow capacities to meet the requirements of any application. Only water and electrical supply are needed to put the "MISTER" systems to work.

	Mobile or stationary
	Electric, gas or air driven
	Injectors
	Timers
	Stainless steel cabinets and bases
	4 stage filtration
	Models from 2 to 1000 nozzles
	Computer compatible
	2 year warranty on pump and motor
	Easy installation

"MISTER" Technology

"MISTER" Atomizing Nozzles

The "MISTER" system treats, filters and pumps ordinary water to between 600 and 1000 psi. It is delivered through a 1/2" stainless steel tube or flexhose. At various distances in the tubing there are unique "MISTER" nozzles that atomize the water into micron sized particulates ranging from 1 micron to 30 microns.

The "MISTER" systems consist of an arrangement of atomizing nozzles, that are controlled by a central control module. The control module maintains the required system operating pressure, filters the water supply, and activates the operation of the nozzles based on signals received from a sensor, which is specified according to the application.

"MISTER" atomizing nozzles have unique performance specifications, and offer very low volume flow rates. "MISTER" nozzles also have very high rates of forward discharge velocity, which cause there high turbulence and results in extremely uniform particle distribution.

Nozzles
.006"-.040"

Operating Pressure
600-1000PSI

Flow
.0128-.0195 gal/min.

Each "MISTER" nozzle includes non- corrosive stainless steel orifice and internal components. A special O-ring seal design requires only finger tightening for a completely watertight, leak proof seal.

To provide a receptacle for each nozzle, lengths of pipe are precision machined at various spacings depending on application requirements.

Other Applications for
DUST & ODOUR CONTROL:

	Sawmills
	Pulp & Paper Mills
	Shake & Shingle Mills
	Re-manufacturing Mills
	Veneer/Plywood Mills
	Smoke Stacks
	Beehive Burners
	Debris Burning

Climate Controller

Humidistat

All MEC systems
are C.S.A Approved

Over 100 dealers world wide to serve you!
Call, Fax or Email for the one nearest you.
Tel: (604)792-7779 Fax: (604) 792-7072