| TECHNOLOGY
The "MISTER"
systems consist of an arrangement of atomizing nozzles,
whose function is controlled by a central control module.
The control module maintains the required operating
pressure, quadruple filters the water supply, and activates
the operation of the nozzles based on signals received
from sensors, which are specified according to the application.
|
CONTROL MODULE
The two major
components of the control module are a positive displacement
pump and motor. Both of these are thermally protected
by a dump valve that releases if the temperature exceeds
140 F. A pressure gauge and solenoid valves regulate
both the inlet and outlet water flow. The inlet water
must reach a pressure of 10 psi before the solenoid
valve is opened. Likewise, the outlet water flow to
the nozzles must reach a pressure of 100 psi before
the solenoid opens. The pressure gauge has a six second
delay feature.
|
ATOMIZING
NOZZLES
"MISTER"
atomizing nozzles have unique performance specifications,
and offer very low volume flow rates. "MISTER"
nozzles also have very high rates of forward discharge
velocity, which cause high turbulence and result in
extremely uniform particle distribution (approx. 2 to
10 microns)
|
