>> Welcome to the MEC Website <<

[ Home ]

MEC's systems break down and scrub gas and air molecules with sub-micron sized water particulates. Odour neutralizing agents can also be injected through the system to control odorous gases.

Some of the common compounds that can be controlled by MEC's technologies are:
Hydrogen
Sulphur Dioxide
Methyl Mercaptan
Ethyl Mercaptan
Skatoles
Indoles
Amines
Carbon Dioxide

THE SYSTEM CAN BE APPLIED AT YOUR MAIN ODOR SOURCE AREAS OR
AT ANY POINT IN THE WASTE SYSTEM
Influent Areas
Clarifiers
Digesters
Aeration Lagoons
Sludge Handling Areas
Sewer Lines
Man Holes
Lift Stations
Treatment Stations
Septic Areas/Wiers


STAINLESS STEEL TUBE & SPIGOTS

NOZZLES

CONTROL MODULE

FLEXHOSE

ADJUSTABLE NOZZLE ORIENTATION 		"MISTER""
Control Module

"MISTER" control modules are available in many flow capacities to meet the requirements of any application. Only water and electrical supply are needed to put the "MISTER" systems to work.
Mobile or stationary
Electric, gas or air driven
Injectors
Timers
Stainless steel cabinets and bases
4 stage filtration
Models from 2 to 1000 nozzles
Computer compatible
2 year warranty on pump and motor
Easy installation
"MISTER" Technology

 




The "MISTER" system treats, filters and pumps ordinary water to between 600 and 1000 psi. It is delivered through a 1/2" stainless steel tube or flexhose. At various distances in the tubing there are unique "MISTER" nozzles that atomize the water into micron sized particulates ranging from 1 micron to 30 microns.

The "MISTER" systems consist of an arrangement of atomizing nozzles, that are controlled by a central control module. The control module maintains the required system operating pressure, filters the water supply, and activates the operation of the nozzles based on signals received from a sensor, which is specified according to the application.
"MISTER" Atomizing Nozzles
"MISTER" atomizing nozzles have unique performance specifications, and offer very low volume flow rates. "MISTER" nozzles also have very high rates of forward discharge velocity, which cause there high turbulence and results in extremely uniform particle distribution.
Nozzles
.006"-.040" 		Operating Pressure
600-1000PSI 		Flow
.0128-.0195 gal/min.


 

Each "MISTER" nozzle includes non- corrosive stainless steel orifice and internal components. A special O-ring seal design requires only finger tightening for a completely watertight, leak proof seal.

To provide a receptacle for each nozzle, lengths of pipe are precision machined at various spacings depending on application requirements.

Other Applications for
DUST & ODOUR CONTROL:
Rendering Plants
Pulp & Paper Mills
Transfer Stations
Food/Fish Processing Plants
Asphalt Plants
Quarries and Mines
Garbage Collection Areas
Petroleum Industry

All MEC systems
are C.S.A Approved

Over 100 dealers world wide to serve you!
Call, Fax or Email for the one nearest you.
Tel: (604)792-7779 Fax: (604) 792-7072



© 2003 MEC Systems Inc.
Web Site Managed by KDL Web Designs