>> Welcome to the MEC Website <<

[ Home ]

MEC's technologies create sub-micron to 20 micron sized particulates that can reduce air borne dust problems and control odours effectively and economically.

Fast, simple installation designs ensure minimal or no production down-time.

"MISTer" systems CAN:
Control odors
Reduce fugitive dust
Provide cooling (compressor rooms)
Control humidity levels (storage areas)
Reduce neighbourhood complaints
Create a safer & healthier work environment

DUST
Cyclones
Bag Houses
Chippers
Planers
De-barking areas
DUST
Chip storage areas
Chip conveyors
Log break down areas
Machine Centres
Load-out areas
ODOURS
Stacks
Recovery Boilers
Settling ponds
Lagoons
Refuse areas



STAINLESS STEEL TUBE & SPIGOTS

NOZZLES

CONTROL MODULE

FLEXHOSE

ADJUSTABLE NOZZLE ORIENTATION

"MISTER""
Control Module

"MISTER" control modules are available in many flow capacities to meet the requirements of any application. Only water and electrical supply are needed to put the "MISTER" systems to work.
Mobile or stationary
Electric, gas or air driven
Injectors
Timers
Stainless steel cabinets and bases
4 stage filtration
Models from 2 to 1000 nozzles
Computer compatible
2 year warranty on pump and motor
Easy installation

"Dust Spray Bar"

"Dust control at Ship loader"
   
"MISTER" Technology "MISTER" Atomizing Nozzles
The "MISTER" system treats, filters and pumps ordinary water to between 600 and 1000 psi. It is delivered through a 1/2" stainless steel tube or flexhose. At various distances in the tubing there are unique "MISTER" nozzles that atomize the water into micron sized particulates ranging from 1 micron to 30 microns.

The "MISTER" systems consist of an arrangement of atomizing nozzles, that are controlled by a central control module. The control module maintains the required system operating pressure, filters the water supply, and activates the operation of the nozzles based on signals received from a sensor, which is specified according to the application. 		"MISTER" atomizing nozzles have unique performance specifications, and offer very low volume flow rates. "MISTER" nozzles also have very high rates of forward discharge velocity, which cause there high turbulence and results in extremely uniform particle distribution.
Nozzles
.006"-.040" 		Operating Pressure
600-1000PSI 		Flow
.0128-.0195 gal/min.
Click for larger imageClick for larger image
Click on photos for larger image

Each "MISTER" nozzle includes non- corrosive stainless steel orifice and internal components. A special O-ring seal design requires only finger tightening for a completely watertight, leak proof seal.

To provide a receptacle for each nozzle, lengths of pipe are precision machined at various spacings depending on application requirements.

All MEC systems
are C.S.A Approved

Other Applications for
DUST & ODOUR CONTROL:
Sawmills
Pulp & Paper Mills
Shake & Shingle Mills
Re-manufacturing Mills
Veneer/Plywood Mills
Smoke Stacks
Beehive Burners
Debris Burning
Over 100 dealers world wide to serve you!
Call, Fax or Email for the one nearest you.
Tel: (604)792-7779 Fax: (604) 792-7072




© 2003 MEC Systems Inc.
Web Site Managed by KDL Web Designs